The workshop.

Projects stay here as they change. Build Logs tell what happened; each project page keeps the current picture.

Making, modifying, repairing, and understanding useful things.

A garage resin-printing workspace in progress: both printers are in the tent, while the exhaust and wash-and-cure workflow remain unfinished.

Current state

Building / Testing

Page updated October 20, 2026

As of October 19, 2026: the Saturn has produced successful calibration prints and a clean test mini after one failed attempt; the Photon P1 has not printed, and the exhaust and wash station remain unverified.

Next action

Rerun the full-screen exposure test over a sheet of white paper to check what may be a line on the left side of the Saturn's LCD, then try a first useful print.

View project
The Anycubic Photon P1 and Elegoo Saturn 4 Ultra on a plastic-covered table inside the garage tent; the Saturn hood is open and its vat is empty.Workspace update · October 12, 2026

Active builds

Assembled Box Turtle 1.1 with its spool lanes and enclosure in place.
BuildingBuild in progressOperation: Gray ShellBox Turtle 1.1 with Longboi 1.0, tracked as a named hardware build with its own chronological log.Open project

Established machines

Hoss, an enclosed Sovol SV08 with teal and purple printed trim.
StableStable; reliability checks as neededSV08 Reliability LabHoss, a Sovol SV08 350, with its hardware, wiring, and fault history kept together; stable as of October 13, 2026.Open project
Sam, an open-frame Sovol SV06 Plus with its nameplate visible.
StableStable; 3MS work remains on holdSV06 Plus: TPU and 3MSSam is a fully operational SV06 Plus workhorse; the 3MS project is on hold while AFC compatibility is explored.Open project
Pinkie's enclosed black Voron V0 with magenta printed parts, clear panels, and the illuminated interior visible.
StableStable during V0.2 conversionVoron V0.2 Recovery and ConversionPinkie is an LDO Voron 0.1 being converted to 0.2; the machine record documents its configuration, recovery work, and unfinished enclosure and calibration tasks.Open project
Teresa, an enclosed Voron 2.4 350 with a cyan build plate and multicolor toolhead, with the bright green Box Turtle mounted above.
Working / EvolvingBack in operation; reliability and MMU follow-upVoron 2.4 350Teresa is working again with an attached Box Turtle (serial 582); the earlier Raspberry Pi shutdown cause remains unknown.Open project
Closer view of Lucie, the Elegoo Centauri Carbon, on the bottom shelf, with its front door and control screen visible.
StableEstablished machineLucie: Centauri CarbonLucie is the shop's Centauri Carbon, confirmed stable and kept here as an established machine.Open project

Planned

Visible as a plan, not presented as an active build.

Concept render exploring a Spawn-inspired enclosed Voron build, with lime accents and a touchscreen.Planned concept · not a current build
PlanningDesign and sourcingSpawn Trident 300A planned three-Z Trident build with a Spawn-inspired direction; design and sourcing decisions are still ahead.Open project

Past machines

Machines that left the shop, kept here for their configuration and history.

Pam, an Original Prusa MK4S with lime green printed parts and a turquoise build plate.
Left the shopTraded October 8, 2026Pam: Prusa MK3S+ to MK4SPam began as a Prusa MK3S+ and was upgraded to an Original Prusa MK4S before leaving the shop in an October 2026 trade.Open project

From build to lasting knowledge

All guides

  1. Project page

    Resin Workshop

    The current picture and next action.

  2. Build Log

    Setting up my garage grow tent for resin printing

    Dated updates · October 20, 2026

  3. Guide

    Resin grow-tent setup guide

    Coming soon — being built from the real workspace

Recent Build Logs

All Build Logs
Setting up my garage grow tent for resin printing Task Prioritizer: one decision at a time Local Screen Recorder: keeping the recording on your device Operation: Gray Shell: a Box Turtle 1.1 beta build
On the shelf 9 parked topics

Older machines and ideas kept for reference. These are not active Workshop projects.

  • Geeetech A10
  • Ender 3 v2
  • Sculpfun S9
  • Geeetech M1 (recorded as functional and shelved)
  • M3D Pro (legacy / display; recorded as intermittent)
  • Future SFS sensor work
  • Future cutter work
  • Ender 3 parts pool and stalled conversions
  • Other mod ideas